LED TV Installation Guide

LED TV Installation Guide – From Novice to Expert

Life can’t be imagined without the LED TV as it provides the best picture quality with high resolution. Undoubtedly, LED TVs are more expensive than traditional TVs therefore they need more care and protection for the immersive display. You spend a lot of money to buy the best LED TV but you can’t enjoy the proper picture until it is installed on a wall mount accurately.

Some people make mistakes during installation because they can’t enjoy the crisp and clear visuals on the bigger screen. How to install and at what height the LED TV must be installed according to your room requirements, the LED TV installation guide can help you the best. Present-day TVs provide superior picture quality and energy efficiency than older TVs. However, setting these LED TVs can be challenging especially if you’re not familiar with installation at all. Therefore, the LED installation guide assists you in mounting your expensive display at the best angle to enjoy the visuals of what it is meant to be.

How to set up LED TV

How to set up LED TV

if You have invested a lot of money in buying the Popular LED choices in Pakistan. The next crucial step is to set up the LED in your ideal location. LED television setup is more difficult than choosing the LED from the sea of brands but following the expert’s steps and LED installation guide you can surpass this challenge!

 Ensure that the TV is set up at the ideal height viewing distance and angle. There are a few steps that you should follow to set up LED TV.

  1. Firstly, unbox your LED TV and place it in a sturdy place.
  2. The top-rated LED TVs come with a stand and wall mount. If you are using any supporting tool to set up the TV, try to follow the manual for the instructions for better results.
  3. When the TV is installed, plug the cord into the back of your TV and then into the electric outlet to turn it on.
  4. The next step is highly important. When you are using either a cable box, satellite receiver, DVD player, or Blu-ray player; connect it to the HDMI input on the TV.
  1. Now, turn on the TV by using the power button on the remote. Later on press the input button on your remote and choose the input source that your video source is connected with whether  HDMI 1 or HDMI 2.

The setup would be completed when you walk through the steps that the TV screen shows you like setting the language, picture, network setting, and overall brightness. In short, do all calibration to get the best optimal results.

Your LED setup is done. If you want to connect to the internet, connect to the WiFi or use an Ethernet cable. You can create your account and install multiple streaming apps like Netflix, and Amazon Prime Video. The USB, HDMI ports, and Bluetooth allow you to transfer your smartphone data on the big screen. Set up is done to kick-start the nonstop fun!

How to mount smart TV on the wall

How to mount smart TV on the wall

The slim and sleek LED TV would look finer if it is mounted neatly on the wall. Wall mounting of TV allows you to save space. Moreover, one of the benefits of TV mounting is it gives a clean and spacious look to your room. Not all mounts are similar. They vary depending on the TV type. The heavy traditional TV has a strong mount that gives more support.

On the other hand, OLED or QLED TV has a slim design and different VESA patterns. So, make sure you choose the accurate wall mount according to your TV type. Also the room requirements such as wall type, sitting area, and distance from the bed, all matter before mounting the smart TV on the wall. Smart TVs are costly, so to avoid taking risks, go through the LED TV installation guide before wall mounting the smart TV.
To mount a Smart TV on the wall you need special Tools and Equipment. One of the key tools for the TV Mounting is a stud finder, level, and drill.

For mounting the TV on the wall, you must ensure the TV viewing height. Also, ensure that the TV is installed in such a place in the room where there must be enough space for the family members to sit around.

Once you are satisfied with the location, find the studs in the wall by using a stud finder. Later, use the level to draw or mark a horizontal line on the wall. The locations are identified.

The next step is to drill the pilot holes. For this purpose drill bit is used to make smaller holes in the marked locations.

Now attach the wall mount to the wall by using tight and sturdy screws.

The crucial step is to attach a mounting plate to the back of the TV. For careful handling, it is highly recommended to read the instructions that come with the TV mount.

Now, lift the LED TV carefully and adjust it onto the wall mount. Use screws to tighten the screen on the mount.

Finally, the hectic work of wall mounting is over but the purpose of the TV is not fulfilled until it shows the exciting picture on the bigger display. To enjoy the clear and crisp visuals cable connection is the prime need.

There are some safety tips that you need to know regarding the installation of LED TVs.

  1. Use the mount according to the TV type
  2. Avoid installing the TV in direct sunlight or near fire
  3. Don’t let the wires and cords hang as it could be hazardous for kids and pets.

For better and more accurate installation, take assistance from the LED TV installation guide.

How to connect cable to LED TV

The TV is all set to watch then what to watch because your favorite cable channel is missing. Then how to connect cable to LED TV to let you enjoy your desired TV show. To connect cable you need a coaxial cable, An HDMI cable, and A cable box.

If there is a cable box, you only need to connect the coaxial cable to the cable input behind the cable box. Then, you have to connect the HDMI cable from the cable box to the HDMI input behind the LED TV. On the other hand, if you don’t have a cable box, connect the coaxial cable directly to the coaxial input on the back of the LED TV for a better connection. Once the whole setup is installed, turn on the both LED TV and the cable box.

The next step is to turn on the TV.  After that, with the help of remote control of the LED TV switch to the correct input source. If you have a cable box, your input source will be HDMI. In addition, if you are directly connecting the coaxial cable to the LED TV, your input source will be TV or RF.

Where is my favorite channel? Your TV is all set but your favorite cable channel is missing, use the remote control for the cable box to scan for your desired channels. At the end of the scanning, you will watch your favorite cable channel on the bigger screen in front of you.

How to hide TV cords and wires

How to hide TV cords and wiresHanging cords and wires on the ground or from behind the TV look like a snake.  Moreover, it could be dangerous for kids and pets. To organize the cables behind the mount or TV stand you can apply different methods.

Firstly, with the help of cord clips with sticking back you can stick the cable behind furniture. The protective sticking does not damage the furniture or wall. Like cord clips, you can zip ties to avoid the cord and wires on the ground.

Secondly, you can use the cable management system. If you are not happy with the cord clips or zip ties to hide your wires, you can switch to a better system. In this regard, you can use a cable management box. This small plastic box is large enough to hide your wires and cords.

There are different types of cable management box available, ensure e to find a cable management box that has multiple holes or slits around the side. It will help you to add cables in different directions. Due to the safe design, you can just place the lid on top to conceal your cables. One of the greatest advantages of cable management is to keep them out of reach of children or pets. Above all, it helps in easy cleaning of the TV, wall, and floor.

To make the Electrical Connection more safe and decent you can use the adhesive Raceway. This is also known as the cord concealer kit to hide your hanging or spread wires without cutting into your walls. These types of raceways usually have an adhesive backing. It helps you to stick it to your wall without damaging it. Later on, you can hide your TV wires and other cables inside the Raceway before placing the cover on it. 

Another way to hide your LED TV wires and cords is to simply use a fabric cord cover. The zippers on the cover give them a clean look. The use of these covers will prevent you from tripping on the floor.

The list doesn’t end here. You can use a panel board to hide the bunch of cables behind the TV.

The common and the best way to hide your TV wires is with an in-wall cable management mechanism. In this way, your cables would be out of sight. In addition, if you use an in-wall power extender with more than one outlet, you can plug multiple devices behind your TV.

How to fix muffled sound on TV”

How to fix muffled sound on TV

Due to some reasons like audio setting issues or connecting errors, TV produces a muffled sound that destroys the charm of the show. The LED TV installation guide helps you to identify as well as fix the muffled sound on the TV. A few basic checks can help you to fix this issue.

  • Check out the Audio or volume setting with the help of the remote control
  • Ensure that all audio connections and cables are properly fixed
  • Also, switch to other channels to know if they have superior sound quality
  • The quickest and best way is to perform the sound test. It will help you to identify the problem quickly.

If you have performed all troubleshooting ways and the problem is not fixed feel free to consult the retailing experts.


The LED TV installation guide helps to install the TV properly. The biggest advantage of this guide is to provide detailed guidelines to help you in setting up the display. Whether you are installing the TV on a stand or wall the following exact steps will help you in the appropriate installation of the TV. Room requirements, viewing distance, and height all need to be considered before installation.

After careful installation, the management of cords and wires is performed by many methods; the most common is cable management. After setting up or installation, sound muffling is common. To fix this, troubleshooting is done to identify the problem and fix it. For enjoying the best picture quality from the best viewing angle, the installation and proper setup are primarily important. Follow the installation safety tips and enjoy the nonstop fun with your family!


Your email address will not be published. Required fields are marked *

Payment Methods

Secured by

We Are Online!
Agent (Online)

We are here to help. Chat with us on WhatsApp for any queries.